Use cases

One software edge, many deployments.

Operators run Netavo BNG in very different shapes from the same build. These are the common ones — each with the configuration, the CLI and the screens it takes to stand it up.

Altnet & open-access FTTP

Terminate PPPoE or IPoE subscribers straight off an open-access or wholesale fibre hand-off, with dynamic address pools, RADIUS policy and per-subscriber QoS.

PPPoE · IPoE · RADIUS

See the deployment

Wholesale L2TP LNS

Be the LNS for a wholesale or mobile LAC hand-off — a national broadband wholesaler or an MVNO core — terminating tunnels over a private NNI, or over IPsec across public transit.

L2TP · IPsec · PPP

See the deployment

Carrier-grade NAT

Stretch scarce IPv4 across thousands of subscribers with deterministic, logged NAT44 — integrated on the BNG or as a standalone CGN appliance.

NAT44 · EIM/EIF · port-block logging

See the deployment

Replace an end-of-life chassis BNG

Move subscribers off a Cisco ASR1000 or similar onto commodity x86 — the same PPPoE/IPoE/L2TP edge, without per-throughput licensing.

ASR1000 successor · x86

See the deployment

Converged PE + BNG

Run the provider edge and the subscriber edge on one box — BGP/MPLS L3VPN, per-service VRFs and subscriber termination side by side.

BGP · MPLS L3VPN · VRF

See the deployment

WISP & fixed-wireless

A lightweight subscriber edge for fixed-wireless and small-ISP networks — runs on modest hardware or a VM and scales as the base grows.

IPoE · CGNAT · AF_XDP

See the deployment

Not sure which one fits?

Tell us how your network hands off subscribers and we'll point you at the closest reference build — and the hardware it needs.

Talk to us Start free eval